To Next PageTo Next PageWhat to do if the Grundig NewYork 55 CLE 9170 SL remote control does not work?
If the Grundig LED TV remote control isn't working, first, make sure there's nothing blocking the remote's signal to the TV. Then, check the batteries and replace them if needed. As a last resort, try switching off the television at the mains switch for two minutes.
What to do if my Grundig NewYork 55 CLE 9170 SL LED TV has ghosting, reflection, no colour picture and no sound?
If your Grundig LED TV is showing ghosting, reflection, no colour and no sound, try automatic or manual tuning/fine tuning the channel. Have your antenna cable or system checked. Also, turn up the colour intensity and select the correct colour standard. If that doesn't work, try a different channel, and ensure the volume isn't set to a minimum.
How to fix impaired or absent Teletext on a Grundig LED TV?
If Teletext is not working on your Grundig LED TV, the problem may be at the station, so try a different channel. If this does not work, try with a different TV channel and carry out fine tuning, as the television channel may not have teletext or there may be an issue with the antenna system. Finally, check the antenna, as the station signal may be too weak.
General| Screen Size | 55 inches |
|---|---|
| Display Technology | LED |
| Smart TV | Yes |
| Operating System | Android TV |
| HDR | Yes (HDR10, HLG) |
| Refresh Rate | 60 Hz |
| HDMI Ports | 3 |
| USB Ports | 2 |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| Sound Output | 20W |
| Resolution | 3840 x 2160 |
Details special features of the television set and important notes on environmental protection.
Instructions for connecting the antenna and power cord, and inserting batteries.
Covers initial setup, tuning channels, language, country, and mode selection.
Covers switching on/off, selecting channels, and displaying information.
Provides safety and usage guidelines for 3D viewing.
Explains supported sources and how to watch 3D content.
Configuration options for 3D mode, effects, and perspective.
Guidance on establishing wired or wireless network connections.
Configuration steps for automatic and manual wired network setup.
Instructions for connecting to a wireless network using a USB dongle.
Details on recording capabilities, data media requirements, and limitations.
Menu options for managing USB recording and data media.
Instructions for recording programmes using one-touch or timer functions.
Accessing and playing recorded programmes from the archive.
Supported video, audio, and image file formats for USB playback.
Procedure for connecting external devices like hard drives or memory sticks.
How to switch on and navigate HbbTV services.
Setting access levels and locking channels or menus.
Resetting the TV to factory default settings.
Functionality for controlling connected devices via HDMI.
Detailed instructions for connecting via HDMI, Component, SCART, and S-Video.
Steps to connect a PC to the television using VGA and audio cables.
Procedure for inserting a CA module and smart card into the CI slot.
Performing an automatic scan for new satellite channels.
Automatic scan for channels from a cable provider.
Automatic scan for digital terrestrial channels.
Common problems, their possible causes, and remedies.
