What to do if the Grundig LED TV remote control does not work?
If the Grundig LED TV remote control isn't working, first, make sure there's nothing blocking the remote's signal to the TV. Then, check the batteries and replace them if needed. As a last resort, try switching off the television at the mains switch for two minutes.
What to do if my Grundig Rom 40 CLE 8160 BL has ghosting, reflection, no colour picture and no sound?
If your Grundig LED TV is showing ghosting, reflection, no colour and no sound, try automatic or manual tuning/fine tuning the channel. Have your antenna cable or system checked. Also, turn up the colour intensity and select the correct colour standard. If that doesn't work, try a different channel, and ensure the volume isn't set to a minimum.
How to fix impaired or absent Teletext on a Grundig Rom 40 CLE 8160 BL?
If Teletext is not working on your Grundig LED TV, the problem may be at the station, so try a different channel. If this does not work, try with a different TV channel and carry out fine tuning, as the television channel may not have teletext or there may be an issue with the antenna system. Finally, check the antenna, as the station signal may be too weak.
To Next Page
General