What to do if my Grundig SCD 5490 RDS CD player does not work or tracks skip?
If your Grundig Car Receiver's CD player does not work or tracks skip, it might be due to incorrect installation. Try fastening the device. Alternatively, the CD might be dirty. Clean it with a soft, lint-free cloth, but avoid using cleaning solutions.
Why are not all loudspeakers working on my Grundig SCD 5490 RDS?
If not all loudspeakers are working on your Grundig Car Receiver, the BALANCE and FADER settings may be incorrect. Check these settings and change them if necessary. Also, a faulty connection could be the cause, so check the connections and change them if necessary.
What to do if I have frequent temporary loss of radio reception on my Grundig SCD 5490 RDS Car Receiver?
If you are experiencing frequent temporary loss of radio reception on your Grundig Car Receiver, the AF (Alternative Frequency) function might be the cause, especially in areas with poor reception. Try deactivating the AF function.
How to fix a Grundig SCD 5490 RDS Car Receiver that cannot be switched on?
If your Grundig Car Receiver's device cannot be switched on, ensure the control unit is properly attached; reattach it if necessary. Also, make sure you hold down the On/Off button for a sufficient duration.
Why is CD sound interference occurring on my Grundig SCD 5490 RDS?
If you are getting CD sound interference occurring on your Grundig Car Receiver, particularly when playing CD-R/RW media, it could be due to copy-protected tracks. Try changing the CD.
What to do if my Grundig Car Receiver display shows an error?
If your Grundig Car Receiver displays an error, it might be due to dirty contacts or incorrect installation of the control unit. Clean the contacts with a lint-free cloth.
Why do the rear speakers switch off on my Grundig SCD 5490 RDS Car Receiver?
If the rear speakers of your Grundig Car Receiver switch off, it may be because the device is too hot (over 70°C). Try turning down the volume.
Why is the radio reception poor on my Grundig SCD 5490 RDS?
If you are experiencing poor radio reception on your Grundig Car Receiver, it may be due to being in an area with poor reception conditions. In this case, wait until the conditions improve.
General| Brand | Grundig |
|---|---|
| Model | SCD 5490 RDS |
| Category | Car Receiver |
| Language | English |
Lists items included in the car audio package.
Highlights key functionalities and specifications of the car radio.
Explains the built-in security measures against theft.
Instructions on how to remove the detachable control unit.
Steps to securely install the detachable control unit.
Introduces access to advanced settings and functions.
Information about the eco-friendly packaging used for the device.
Recommendation to have the device fitted by a specialist.
Advises on safe usage of the device while driving.
Warning about playing multimedia CDs containing data tracks.
States the device uses a Class 1 laser product.
Explains the electronic security provided by coding.
Guidance on how to clean the device's front panel.
Lists compliance with EMC protection standards.
Identifies and describes the various buttons and controls on the device.
Explains options for customizing the display content.
Details how to operate the radio tuner functions.
Describes operations and functions specific to CD playback.
Explains how to use the CD changer functionality.
Instructions for powering the device on and off.
How to adjust volume, bass, treble, fader, and balance.
How to store and recall personalized sound settings.
Steps to save sound profiles to memory buttons.
How to retrieve stored sound settings.
Resets sound settings to default or linear mode.
How to activate or deactivate the loudness function.
How to switch between FM and AM radio sources.
Instructions for automatic and manual station tuning.
Detailed steps for tuning to specific frequencies.
How to save favorite radio stations.
How to recall saved radio stations.
How to enable or disable traffic announcement reception.
Accessing and managing announcement preferences in DAB mode.
How to choose a radio station group (ensemble) on DAB.
Accessing additional sub-programs available in DAB.
Instructions to select available sub-programs.
How to exit a selected sub-program and return to normal listening.
Steps for inserting a CD into the device.
How to switch the input source to CD mode.
How to choose a specific track on the CD.
Finding a specific part of a song during playback.
Setting the device to continuously play a selected track.
Previewing the beginning of each track.
Enabling shuffle playback for all tracks on the CD.
How to pause or exit CD playback.
Instructions for removing the CD from the device.
Connecting and selecting the CD changer as the audio source.
How to choose specific CDs from the changer.
Choosing a specific song from the selected CD.
Refers to page 12 for CD playback options.
Connecting external devices via AUX input.
Accessing and modifying advanced device configurations.
Using the volume knob to navigate expert options.
Confirming chosen settings with the SOUND button.
Adjusting volume levels for specific expert settings.
Finalizing changes by pressing the SOUND button.
Choosing the display language from available options.
Configuring anti-theft code settings for security.
Setting a maximum volume level for startup.
Boosting low frequencies for enhanced sound at low volumes.
Automatically adjusting volume based on vehicle speed.
Enabling or disabling traffic announcement reception.
Setting a minimum volume for traffic news announcements.
Managing audio muting when a phone call is active.
Enabling or disabling confirmation beeps for functions.
Controlling the availability of the AM radio band.
Controlling the availability of the SW radio band.
Adjusting how sensitive the station search is.
Automatic switching between regional RDS stations.
Choosing the preferred format for displaying dates.
Setting clock mode, including RDS synchronization.
Configuring the device's current time and year.
Setting the current date on the device.
Enabling the clock display when the ignition is off.
Linking radio power to the vehicle ignition.
Adjusting volume levels for CD playback.
Adapting volume for CD changer and AUX inputs.
Selecting between positive or negative display modes.
Setting the contrast level for the display screen.
Adjusting display brightness for day or night.
Enabling DAB module to use alternative frequencies.
Switching to RDS when DAB reception is poor.
Switching to DAB when the same station is available.
Tracking programs with similar content if DAB reception is poor.
Adjusting dynamic range for natural playback of music.
Testing reception quality for DAB ensembles.
Configuring the device to remember the last station.
Steps to enable the anti-theft coding function.
How to input the security code using memory buttons.
Procedures to disable the coding security.
Steps to operate the device after coding is active.
Instructions for installing the main unit into the vehicle.
How to connect the radio antenna to the device.
Details about the device's fuse type and location.
Explains power and signal connections for various functions.
Wiring details for connecting front and rear speakers.
Wiring for CD changer, AUX, and other auxiliary inputs.
Factors affecting radio signal quality during travel.
How RDS displays station names and information.
Automatic switching to better reception frequencies.
Receiving traffic news from other RDS stations.
Supported CD media types and copy protection.
Receiving digital radio broadcasts in CD quality.
Details on DAB broadcast frequency ranges.
How the receiver automatically selects DAB RDS sources.
Solutions for power issues and control unit attachment.
Addressing display errors and poor radio reception.
Troubleshooting speaker, CD player, and sound interference.
Resolving problems with code entry and device switching off.
To Next Page