Need help?Do you have a question about the Grundig STR 400 AP and is the answer not in the manual?
General| Country | Germany |
|---|---|
| Manufacturer / Brand | Grundig |
| Model | STR 400 AP |
| Category | Receiver |
| Wave bands | FM, MW, LW |
| Material | Metal case |
| Frequency Response | 20 Hz - 20 kHz |
| Power type and voltage | AC 220V |
| Loudspeaker | External |
| Notes | Stereo receiver with built-in amplifier |
| Input Impedance | 47kΩ |
| Dimensions | 420 x 270 x 150 mm |
Essential guidelines for environmentally responsible operation and disposal of the receiver.
Details connecting the receiver to a TV via EURO-AV cable or modulator.
Explains how to select between aerial inputs A and B for different reception setups.
Discusses adapting the receiver to various LNC types and system configurations for optimal reception.
Explains the process of adjusting the polarizer for optimal signal reception, especially for horizontal polarization.
Describes how to initiate an adjustment run for correcting aerial positioning errors.
Explains how to switch between programme selection and frequency entry modes.
Guides on selecting polarization and aerial input (A or B) for optimal signal reception.
Guides on adjusting video deviation and polarity for good picture quality.
Covers manual aerial adjustment, signal level indication, and setting limits and station names.
Guides on setting the optimum value for the polarizer skew for improved signal reception.
Explains how to transfer the optimum skew value to all preprogrammed stations of the same group.
Explains how to activate and select the decoder mode (AUTOMAT. or ON).
Guides on performing an automatic search for new satellite stations and storing them in memory.
Details how to activate and use the child lock feature with a personal security code.
Guides on selecting timer positions and programming specific times for programmes.
To Next Page