Grundig TK 20 - Page 3

aS
OPEN OUT THIS
PAGE FOR REFERENCE
AND LEAVE OPEN
AS YOU READ
*
IMPORTANT
All Grundig machines carry a serial number on
which our records are based. You will notice a
space on your Application for Registration of
Guarantee in which you should insert this number.
In the TK20 this number will be found on a
blue and black label on the motor frame and also
engraved on the chassis, these numbers are visible
through the bottom grille and commence with 5014
followed by five other figures.
It is most important that this number is copied
correctly on to your card and quoted in all
correspondence.