Do you have a question about the Grundig Vision 4 32-4806 T and is the answer not in the manual?
Accessing and using service and special operational modes.
Schematic and layout of the power supply unit.
Component layout and circuit diagram for YCR190R-3 main board.
Component layout and circuit diagram for YCR190R-4 main board.
Principal circuit diagram for the power supply board.
Blocking specific TV channels using a PIN code.
Steps to block specific channels using a PIN.
Steps to enter the service mode using a code.
Steps to exit the service mode.
Table showing basic configuration settings in service mode.
Procedure for performing an automatic channel scan.
Schematic diagram for the power supply unit.
Continuation of the power supply unit schematic.
Detailed schematic for the SCART input connections.
Schematic diagram for the VGA PC input.
Schematic for component video and audio inputs.
Circuit diagrams for the HDMI input sockets.
Schematic for the onboard tuner module (PCB R-3).
Continuation of the onboard tuner module schematic.
Circuit diagram for the TDA9885/TDA9886 integrated circuit.
Schematic diagram for the tuner module.
Schematic for the MSB1200 COFDM demodulator IC.
Circuit diagram detailing the connections to the scaler IC.
Circuitry related to IC configuration selection for the scaler.
Pinout and connection details for the main scaler IC.
Diagram showing the DDR-SDRAM data interface connections.
Circuit diagrams for SPI flash memory and EEPROM.
Circuit diagram for the LVDS interface.
Schematic diagram for the SUB_MCU microcontroller.
Circuit diagram for the PCMCIA interface.
Schematic of the audio amplifier IC and its connections.
Schematic of the audio amplifier IC and its connections.
Visual layout of components on the YCR190R-4 main board.
Visual layout of components on the YCR190R-4 main board.
Schematic diagram of the power supply board.
Continuation of the power supply board schematic.