Why is my Grundig VISION 9 37-9870 T remote control not working?
If your Grundig TV remote control isn't working, make sure you're pointing it directly at the TV. Also, check the batteries and replace them if needed. If that doesn't work, try switching off the television with the main power button for about 2 minutes.
What to do if my Grundig TV has picture but no sound?
If your Grundig TV has a picture but no sound, the volume may be set to minimum. Try turning up or switching on the volume.
How to fix poor picture contrast on Grundig VISION 9 37-9870 T?
To fix poor picture contrast on your Grundig TV, try adjusting the brightness, contrast, or color settings. It could also be a problem with the station, so test with another channel to check.
What causes interference to picture and sound on Grundig VISION 9 37-9870 T TV?
Interference to the picture and sound on your Grundig TV can be caused by other devices. Try changing the position of the interfering device.
What to do if Grundig VISION 9 37-9870 T has screen lit (snow), but no station?
If your Grundig TV screen is lit with static but you're not getting a station, check if the antenna cable is connected. If it is, you may need to start the station search to program the channels.
Why is there no color on my Grundig VISION 9 37-9870 T TV?
If your Grundig TV has no color, first ensure that the color intensity isn't set to minimum; turn it up. Also, check the TV standard setting and select the correct color standard if this setting option is available. It may also be a problem with the station, so test with another channel.
What causes ghosts or reflection on Grundig TV screen?
Ghosts or reflections on your Grundig TV screen can be due to the channel setting. Try automatic or manual channel setting/fine tuning. It could also be an antenna issue; have the antenna cable or system checked.
Why is picture dark in PC mode on Grundig VISION 9 37-9870 T TV?
If the picture is dark in PC mode on your Grundig TV, it could be due to an incorrect setting for picture resolution and picture frequency on the PC. Change the setting on the PC (for example, picture resolution 1280 x 768, picture frequency 60Hz).
What to do if teletext is missing or faulty on Grundig VISION 9 37-9870 T TV?
If the teletext on your Grundig TV is missing or faulty, it could be a problem with the station, so test with another channel. It may also be due to the television station having no teletext or a problem with the antenna system; test another channel for fine tuning and ghosts. A weak station signal can also be the cause, so check the antenna system.
General| Screen Size | 37 inches |
|---|---|
| Display Technology | LCD |
| Smart TV | Yes |
| HDMI Ports | 3 |
| USB Ports | 2 |
| Wi-Fi | Yes |
| Bluetooth | No |
| Energy Efficiency Class | A |
| Resolution | 1920 x 1080 |
| Tuner | DVB-T, DVB-C |
Provides essential safety information and guidelines for setting up the television for optimal performance and safety.
Explains warranty conditions for pixel faults and provides important considerations for mounting the television on a wall bracket.
Details television features, digital reception requirements, and the purpose of the Common Interface (CI) slot.
Provides step-by-step instructions for connecting the antenna and the power cable to the television set.
Illustrates and labels all input/output sockets and physical controls on the television set.
Details the functions of each button on the remote control for operating the television and its features.
Step-by-step guide on how to open the battery compartment and insert batteries correctly into the remote control.
Describes the remote control layout, button functions, and how to program it for other devices.
Guides through automatic tuning to find and store available digital and analogue TV channels.
Instructions on reordering, deleting, or locking television channels within the program list.
Details locking channels for parental control using a PIN code and deleting channels.
Explains how to select and save favorite TV channels into custom lists for quick access.
Describes adjusting picture parameters like brightness, contrast, sharpness, and picture improvements.
Introduces the 3-D sound projector, its technology, and room conditions for optimal use.
Illustrates setting up the microphone stand for automatic sound projector calibration.
Guides through connecting the microphone and initiating the automatic sound projection setup process.
Details manual adjustments for channel volume and sound projection settings for optimal audio.
Explains adjusting sound projection parameters like beam direct, angle, focus, and performing a sound test.
Describes how to save configured sound projection settings for beam direct, focus, and angle.
Explains adjusting volume and selecting sound types like Stereo, Mono, or two-channel audio.
Details Stadium and Stereo sound modes, explaining their audio projection characteristics and suitability.
Describes Night sound mode for low volume playback and adjusting tone controls like bass and treble.
Explains using the equalizer with preset modes or creating a custom user setting for sound adjustment.
Covers turning the TV on/off, selecting channels directly, using the channel list, and adjusting volume.
Explains selecting channel lists, AV inputs, audio languages, and subtitles for digital channels.
Guides on displaying program info, using freeze-frame, and navigating the Electronic Program Guide (EPG).
Describes selecting picture aspect ratios and viewing remote control functions on-screen.
Instructions for using TOP, FLOF, and normal teletext modes, including direct page access and scrolling.
Explains teletext page stop, sub-page navigation, revealing answers, and split-screen mode.
Explains automatic/manual time zone setting and daylight saving time adjustments.
Instructions for setting program timers to record or remind about specific shows, including date and time.
Details setting switch-off/on timers and changing the television's on-screen menu language.
Guides on setting parental controls, locking programs, and activating the keypad lock.
Details changing the PIN code and adjusting the transparency of on-screen display (OSD) menus.
Covers digital features like language selection for audio/subtitles and performing a digital reset.
Explains connecting external devices like DVD players and set-top boxes using HDMI for digital signals.
Details connections using component input (YPbPr), Euro/AV sockets, and SCART for analogue signals.
Describes analogue TV signal connections (CVBS) and selecting input channels for various devices.
Instructions for connecting a subwoofer and headphones, and adjusting associated audio settings.
Guides on connecting external decoders or satellite receivers using EURO-AV cables and selecting SCART.
Explains connecting camcorders via VIDEO/S-VHS and AV receivers via SPDIF OUT.
Instructions for connecting a PC using VGA and audio inputs, and adjusting PC display settings.
Step-by-step guide on inserting the CI module and smart card into the television's CI slot.
Explains accessing PAY-TV channels after entering the PIN code for the CI module and smart card.
Guides on performing an automatic search for digital TV stations and antenna voltage settings.
Explains manually tuning digital stations by number and searching for analogue channels.
Guides on manually fine-tuning analogue reception and managing channels by number.
Instructions for deleting, sorting, and entering custom names for analogue channels.
Details how to lock specific analogue TV channels using a PIN code for parental control.
Explains selecting and saving favorite analogue channels into custom lists for quick access.
Guides on viewing signal properties like frequency, modulation, quality, and strength for digital channels.
Step-by-step instructions on safely removing the television stand for wall mounting.
Lists technical specifications and provides an environmental note regarding product disposal and recycling.
Lists common faults, their possible causes, and recommended remedies for troubleshooting.
Provides information relevant to UK units, including plug safety and wiring instructions.
To Next Page