EasyManua.ls Logo

Gryphon Callisto - Core Operation and User Interface; Burn-In and Warm-Up; Placement; Menu-activated functions

Default Icon
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Burn-In and
Warm-Up
Your Gryphon unit has been
thoroughly tested and burned in
before shipping. Performance
will continue to improve during
the first 40 – 50 hours of normal
use. After this period optimum
performance will be reached
approximately 45 minutes after
turn-on. With the exception of
Class A power amplifiers, we
recommend leaving your
Gryphon components powered
up at all times.
Placement
Care must be taken to position
the Callisto only on a stable sur-
face which can reliably support
the weight of the amplifier. The
amplifier's heat sinks have been
carefully designed and placed to
optimize heat dissipation for
ideal cool operating conditions.
In order for the heatsinks to
operate effectively, there must
be ample air circulation around
the Callisto at all times.
Do not place the Callisto on or
near any source of heat. Do not
place any object directly on top
of the Callisto. Do not place the
Callisto in an enclosed space
such as a cabinet, unless ample
ventilation is provided.
Menu-activated
functions
The Gryphon Callisto incorpo-
rates several functions which are
accessed via a Menu system.
To access the Menu, press
Menu. MENU will appear in the
display and the Callisto will mute
its output. CONTINUE will blink
in the display. To enter the Menu,
press Monitor. If you do not wish
to access the menu-controlled
functions, press an Input button
so that EXIT blinks in the display,
then press Monitor to return to
normal playback and to the nor-
mal display.
When you enter the Menu,
NAME INPUT will appear in the
display. Press Menu again to
move through the menu-con-
trolled functions in the following
order:
Name Input - Change Max Level
- Change Start Level -
Brightness Control - Restore
Settings - Dedicate input 3 to AV
- Continue/Exit
At the end, you can either con-
tinue from the beginning of the
list or exit the Menu. To return to
the top of the list, press Monitor
and NAME INPUT will appear in
the display. To exit the Menu,
9
The master On/Off switch on
the Callisto is placed on the
underside of the unit near the
front.

Related product manuals