GSK GSK928TEa - User Manual

I
In this user manual we have tried to describe the matters
concerning the operation of this CNC system to the greatest extent.
However, it is impossible to give particular descriptions for all
unnecessary or unallowable operations due to length limitation and
products application conditions; Therefore, the items not presented
herein should be regarded as “impossible” or “unallowable”.
Copyright is reserved to GSK CNC Equipment Co., Ltd. It
is illegal for any organization or individual to publish or reprint this
manual. GSK CNC Equipment Co., Ltd. reserves the right to ascertain
their legal liability.

GSK GSK928TEa Specifications

General

Minimum input unit	0.001mm
Frequency	50/60 Hz
Control Type	CNC
Number of Controlled Axes	2 axes
Display	LCD
Cutting feedrate override	0~150%
Spindle override	50%~120%
PLC	Built-in
Communication Interface	USB
Input Voltage	220VAC
Rapid traverse override	25%, 50%, 100%
Threading	Supported