4
7
5
SETUP STEP 1 STEP 2 STEP 3 STEP 4 CONGRATS!
4. Now check the front brakes. Make sure that they don’t pull back too far.
There should be a gap between a fully compressed brake and the grip.
5. Vigorously twist the saddle back and forth to make sure it won’t move while
you’re riding.
6. Inflate the tires to the manufacturer’s recommended pressure, which is
marked on the side wall of the tire.
7. Refer to the included fork, shock, and dropper post manuals to ensure that
you get them set up properly for your weight and riding style.
8. Finally, give the bike a final bounce to make sure nothing is loose.
Have Fun!
Ensure that the brakes are working by rolling the bike back and
forth slightly while squeezing the brakes. Make sure they grip.
4
CHECK LIST
CONTINUED
To Next Page
Loading...
