STEP 2
CONTINUED
SETUP STEP 1 STEP 2 STEP 3 STEP 4 CONGRATS!
5
6
4. The disc brake rotor on the wheel goes on the
left side of the bike, and it slides inside the brake
caliper on the fork. Roll the wheel into the fork,
ensuring that the brake rotor goes inside the
caliper.
5. The fork dropouts will rest on the wheel hub.
6. Insert the through-axle into the brake side of the
wheel. Push it in snugly, and then tighten it down
with the Allen key. Torque this through axle to
specification maked on the through axle
4
To Next Page
Loading...
