1. Install your preferred pedals using the included
washers in the small box. There’s one for each
pedal.
2. Locate the left and right pedals (marked ‘L’ and ‘R’
on the axle), and install them on the appropriate
side of the bike by screwing them into the crank.
Tighten the pedals in the direction of the front
wheel.
3. Tighten both pedals very firmly using the pedal
wrench included in the box.
STEP 3
INSTALL
THE PEDALS
1
1
2
3
SETUP STEP 1 STEP 2 STEP 3 STEP 4 CONGRATS!
Pedals may or may not be included in your bike’s build.
To Next Page
Loading...
