19
Technical Information
Bottom Bracket BSA Threaded (Euro)
Bottom Bracket BSA Threaded (Euro)
1. Thoroughly grease the threads and cup
faces
3. Apply BB spacers to the BB cups
depending on the specification found in
the BB manufacturers manual.
4. Thread drive side cup in reserve left-
hand thread per manufacturer torque
spec
5. Thread non drive side cup in regular
right-hand thread per manufacturer
torque spec
6. Wipe o excess grease
7. The chainring should be in-line with the
idler sprocket OR slighter outboard of the
idler sprocket -this depends on the crank
and both are as designed.
To Next Page
Loading...
