STEP 3
INSTALL THE
FRONT WHEEL
1
1
2
3
SETUP STEP 1 STEP 2 STEP 3 STEP 4 CONGRATS!
1. First, make room for the tire by squeezing the brakes
together and releasing the brake cable. This will spread
them open to allow the tire to slide in easily.
2. In the parts box, you’ll find the quick-release skewer.
The quick release has an adjusting nut, two springs,
and the quick release lever.
Unscrew the adjusting nut on the end and remove
one spring.
3. Determine the direction that the tire is supposed to
spin, by looking at the side wall of the tire for the
direction arrow.
Insert the quick-release skewer through the left-
hand side of the wheel. Reinstall the spring, ensuring
the small end faces inside, then lightly screw on the
adjusting nut.
The order should be: adjusting nut, spring, the wheel,
another spring and the quick release lever.
To Next Page
Loading...
