1. Remove the fork spacer that was shipped with
the bike.
Now you can remove the bicycle from the box and
set it on the ground. You can recycle the box now.
2. Find the quick-release skewer that came in your
box of parts. There will be an adjusting nut, two
springs, the quick release lever.
3. Remove the adjusting nut and the spring. Locate
the disc brake rotor on your wheel and insert the
quick-release skewer through the opposite side.
STEP 3
INSTALL
FRONT WHEEL
1
1
2
3
SETUP STEP 1 STEP 2 STEP 3 STEP 4 CONGRATS!
DISC BRAKE ROTOR
To Next Page
Loading...
