Gtech CLM Series - Adjusting the Cutting Height; Using the Cordless Lawn Mower

WARNING: to reduce risk of personal injury, wait for the blade to stop rotating and
remove the safety key before adjusting the cutting height.
1313
80
70
60 50 40
30
Adjusting the cutting height
Note that the lower settings will scalp uneven
lawns and reduce your lawn’s resistance to wear
and drought.
To adjust the height, hold the lever firmly and
move it into the notch required.
When mowing on uneven ground, it is
suggested you test the cutting height on
a small patch of grass, to avoid cutting
too deep and creating bald patches.
30
50
60
70
80
40
For longer grass, uneven
ground and damp grass
For a healthy, level,
hard-wearing lawn
For very level,
fine- leaved
lawns
Using the Cordless Lawn Mower
Push the mower along at a walking pace when
mowing.
When the filling indicator flap closes, it is time to
empty the bin. Note: if the bin over-fills, the grass
chute will clog and the flap will close again.
4692_CLM50_manual_update_aw.indd 134692_CLM50_manual_update_aw.indd 13 25/11/2020 13:3325/11/2020 13:33