WARNING: To reduce risk of personal injury, wait for the blade to stop rotating
and remove the activation key before adjusting the cutting height.
1
2
3
4
5
6
Operating the Cordless Lawn Mower
9
When you press the lever to the handle,
the mower will start. When you release the
lever, the mower will stop.
To operate the mower, press and hold the
green saftey button and pull the lever under
the handle.
Adjusting the cutting height
The mower has 6 cutting-height settings
between 30mm and 80mm.
Note that settings 2 and 1 will scalp uneven
lawns and reduce your lawn’s resistance to
wear and drought.
To adjust the height, hold the lever rmly
and move it into the notch required.
When cutting on uneven ground, it is
suggested you test the cutting height on
a small patch of grass, to avoid cutting
too deep and creating bald patches.
30mm
50mm
60mm
70mm
80mm
40mm
For longer grass, uneven
ground and damp grass
For a healthy, level,
hard-wearing lawn
For very
level, ne
leaved lawns
To Next Page
Loading...
