GTS DWG (BL) 17/7-2 ZE - User Manual

Issue 07/2011
Built-in generators with switch cabinet
for permanently installed
power generation systems ≥ 12kVA
in re engines
DWG (BL) 13/7-2ZE
to
DWG (BL) 40/14-4ZE
A
A
A V k Ω
Hz
Installation and operating manual
English 07/2011

Summary

Important information and notes

Qualified personnel

Information on persons authorized for installation, commissioning, and operation.

Intended use

Details the specific applications and limitations for the power generation systems.

Safety instructions

Danger to life through electric shock

Details hazards and precautions related to electric shock, potentially fatal.

Danger to life through electric shock

Warning: Risk of injury and risk of damage!

Warning: Risk of explosion

Warning: Danger to life caused by electric shock and risk of damage.

1 Description of power generation system

1.4 Generator

1.4.1 Function

1.5 Switch cabinet

Switch cabinet variants and components

2 Technical data

2.1 Generators

Presents technical data for 2-pole and 4-pole generators.

3 Installation of generator

3.1 General safety instructions

Provides essential safety warnings for generator installation and handling.

3.2 Requirements on the installation position

3.3 General provisions for installation

3.4 Permissible installation positions

3.5 Installation of generators of model 132

3.5.1 Installation dimensions and assembly

3.5.2 Minimum clearances and cooling provisions

3.5.3 Assembly instructions, coupling via drive shaft

Alignment

Assembly example 1: R+W drive shaft with clamping hub connection

Assembly example 2: R+W drive shaft with cone hub connection

3.5.4 Assembly instructions for hydraulic drive

3.5.5 Assembly instructions for belt drive

3.6 Installation of generators of model 160

3.6.1 Installation dimensions and assembly

3.6.2 Minimum clearances and cooling provisions

3.6.3 Temperature and pressures of the cooling air

3.6.5 Assembly instructions for hydraulic drive

Assembly of flange mount hydraulic drive

3.6.6 Assembly instructions for belt drive

Assembly instructions for belt drive

4 Installation of switch cabinet and electrical connection

4.1 General safety instructions

Provides essential safety warnings for installing the switch cabinet and electrical connections.

4.2 Requirements for the installation location

4.3 General provisions for installation

4.5 Electrical connection

4.5.1 Instructions, laying of cables

4.5.2 Instructions, connecting the generator

4.5.3 Instructions for connecting the switch cabinet

5 Operation

5.1 General safety instructions, operation

Provides critical safety information for operating the power generation system.

5.2 Permissible operating conditions

5.3 Working safely with electrical devices

Safe handling of electrical equipment

Instructions for safely working with electrical devices and equipment.

5.4 Electrical safety devices, safety measures

5.5 Power generation system operation

5.5.1 Power sockets, controls and displays

5.5.2 Power distribution and connection of devices

Safe device connection and power distribution

Guidelines for connecting devices, avoiding overloads and voltage mismatches.

Device connection sequence

5.5.3 Warning; disconnect with faulty insulation

5.5.4 Check insulation monitor

5.5.5 Protective earth check for devices of protection class I

5.6 Checking the generator

5.6.1 Description

6 Care and maintenance

Maintenance overview and safety

6.1 Maintenance overview

6.2 General safety instructions, care and maintenance

GTS DWG (BL) 17/7-2 ZE Specifications