QX System Installation Manual – Issue C
- 3 -
STATUTORY REQUIREMENTS
Hereby Guardall, declares that the QX18i and the QX34i are in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
If you have any doubts concerning the suitability, connection or uses of this apparatus then consult a
suitably qualified person before continuing.
SUITABILITY FOR USE
The apparatus has been designed to work on all European analogue networks and has been
independently tested to TBR21. It provides the following facilities:
1. Alarm transmission and transmission/reception of configuration data.
2. Automatic Call Initiation.
3. Series connection.
4. Dial tone Detection
5. Automatic dialling using DTMF tones.
6. Automatic Call Answering.
7. Stored number dialling.
8. Timed Break Register Recall.
It is not suitable for connection to PABX systems or for use as an extension to a payphone.
To Next Page