FLASHｘ２
Adjustment 04
STEP11.
Force mode (auto learning of
sensitivity): When in this mode
door will travel up at full speed
and stop at up limit for 2 seconds.
Door will then travel down at full
speed and stop at down limit. The
Opener will beep 3 times, force
mode is now set.
Press the Force button to auto
learn force.
STEP13.
Press any button on transmitter.
OK LED blinks once and beeps
twice. Transmitter is now set.
BEEPｘ2
STEP12.
To program transmitter press
“radio” button. OK LED blinks
twice.
TO
STEP13
OK
BEEPｘ３
13
To Next Page
Loading...
Need help?
General
