7
Expert Power Control 8042
© 2020 GUDE Systems GmbH
Device Description
1 Device Description
1.1 Security Advice
· The device must be installed only by qualified personnel according to the following
installation and operating instructions. The manufacturer does not accept responsib-
ility in case of improper use of the device and particularly any use of equipment that
may cause personal injury or material damage.
· The device contains no user-maintainable parts. All maintenance has to be per-
formed by factory trained service personnel.
· This device contains potentially hazardous voltages and should not be opened or
disassembled.
· The device can be connected only to 100 - 240 V AC (50 - 60 Hz) power supply
sockets.
· The used power cords, plugs and sockets have to be in good condition. Always con-
nect the device to properly grounded power sockets.
· To disconnect the appliance quickly and safely from the power supply, the outlet
supplying the appliance with power must be easily accessible.
· This equipment is designed for indoor use only. It must not be used in condensing or
excessively hot environments.
· Please also observe the other instructions in the instructions for proper handling of
the device.
· Because of safety and approval issues it is not allowed to modify the device without
our permission.
· The device is NOT a toy. It has to be used or stored out of range of children.
· Care about packaging material. Plastics has to be stored out of range of children.
Please recycle the packaging materials.
· In case of further questions, about installation, operation or usage of the device,
which are not clear after reading the manual, please do not hesitate to ask our sup-
port team.
· Please, never leave connected equipment unattended, that can cause damage.
· Only connect electrical devices that do not have a limited duty cycle. This means that
in the event of a fault, all connected electrical devices must be able to withstand con-
tinuous activation without causing damage.
1.2 Content of Delivery
The package includes:
· Expert Power Control 8042
· 1 x Power Supply cable (IEC C19, max. 16 A)
· Quick Start Guide
1.3 Description
The Expert Power Control 8042 can switch 12 load outputs (IEC C13, max. 10A),
that are fed from a mains connection (IEC C20, max. 16A) . The device has the follow-
ing features:
To Next Page
Loading...
Need help?
General