16
Technical Data
Fan heater GH 2000
Article no. 85175
Mains connection 220-240 V~, 50-60 Hz
Heat output 2 kW
Number of heating stages 2 + fan function
Heating stages 1 / 2 kW
Max. power consumption 2 kW
Rated current consumption 8,7 A
Space heating capacity ca 20 m
3
Seasonal space heating energy eciency η
s
36 %
Air ow rate 75 m
3
/h
Length of connection cable 115 cm
Type of plug CEE 7/17 (contour plug)
Overheating protection 85 °C
Protection type/class IP20 / II
Noise value specication L
WA
at 1m distance 54 dB
Dimensions L x W x H 215 x 132 x 265 mm
Net/gross weight 0,9/1,1 KG
Required information on electric single room heaters
Heating power
Nominal heating power P
nom
2,0 kW
Minimum heating power (indicative) P
min
1,0 kW
Maximum heating power P
max, c
2,0 kW
Additional power consumption
At nominal heating power el
max
0,0 kW
At minimum heating power el
min
0,0 kW
In stand-by mode el
SB
0,0 kW
Type of heat supply, only for electric storage space heaters (choose one)
Manual heating cost control with integrated thermostat -
Manual heating cost control with room and/or outdoor temperature recording -
Manual heating cost control with room and/or outdoor temperature recording -
Fan assisted heat output
-
Type of heat output/room temperature control (choose one)
One-stage heat output without room temperature control -
Two or more manual stages without room temperature control -
With room temperature control using a mechanical thermostat
With electronic room temperature control
-
Electronic room temperature control plus day timer
-
Electronic room temperature control plus week timer
-
Other control options (multiple selection possible)
Room temperature control with presence detection -
Room temperature control with window opening status detection -
With remote control option -
With adaptive switch-on control
-
With operating time limit
-
With "Black Bulb" temperature sensor, black
-
ENGLISH
EN
To Next Page
Loading...
Need help?
General
