21
ENGLISH
EN
Position
Fan heater GH 2000
1 Rotary control room thermostat
2
Function controller heating stages and ventilation
O: O
: Ventilation / Fan
I: Heating level 1 (1000 W)
II: Heating level 2 (2000 W)
3 Operating control lamp
Switch on the unit
If you have set up the unit correctly and ready for
operation as described in the chapter Commissioning,
you can now switch it on.
Set heating level
You can select between heating level 1 and heating
level 2 with the function knob
2
.
Position I: Heating level 1 (1000 W)
Position II: Heating level 2 (2000 W)
To use the unit as a fan only, set the function controller
2
to the ventilation function .
Setting the room thermostat
MIN
MAX
Operation
Control panel
1 23
To Next Page
Loading...
