EasyManua.ls Logo

Gude TK 2500 - Residual Risks; Emergency Procedure

Gude TK 2500
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
TK 2500
Training:: Using the appliance only requires corre-
spondingtraining by a professional or the Operating
Instructions. Nospecial training is necessary.
The operator is responsible for accidents or risks to
third parties.
Residual risks
Danger of injury !
Always keep hands away from the path of the saw
blade.
In spite of compliance with all relevant design
regulations, dangers may still present themselves
when the machine is operated, e.g.:
- work piece parts being thrown o
- parts of damaged tools being thrown o
- noise emissions
- wood dust emissions
Emergency procedure
Conduct a rst-aid procedure adequate to the injury
and summon qualied medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. For the sake of eventual
accident, inaccordance with DIN13164, a workplace
has to be ttedwith a rst-aid kit. It isessential to re-
place any usedmaterial in the rst-aid kitimmediately
after it has been used.
If you seek help,state the following pieces ofinfor-
mation::
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Disposal
The disposal instructions are based on icons placed
on the appliance or its package. The description of the
meanings can be found in the “Marking chapter.
Transport packaging disposal
The packaging protects the appliance against damage
during transport. The packaging materials are usually
selected depending on their environment friendliness
and disposal manner and can therefore be recycled.
Returning the packaging into circulation sav
Do not dispose electric appliances as household
refuse. According to the European Directive No.
2002/96/EG on waste electrical and electronic
equipment and based on including this Directive in
the national law, separate collection of worn electrical
equip
Symbols
Caution!
Read the Operating Instructions
Before carrying out any work on the machi-
ne, disconnect the plug from the socket.
Wear ear protectors!
Wear eye protective goggles !
Wear protective gloves !
Always keep hands away from the path of
the saw blade.
Protect against humidity
Never expose tool to rain.
Cable pulling / transport prohibited
Forbidden operation for persons with
chainlet
Forbidden operation for persons with
long hair.
Keep distance of persons
Observe to keep out of dangerous zone
Warning against dangerous electric
voltage
Warning against hand injuries
Warning against bounced subjects
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Protect against humidity
This side up
GB
English

Related product manuals