8
Wiring the System.
CAUTION!
POLARITY IS CRITICAL. REVERSE POLARITY WILL DAMAGE THE LIGHT, AND
RECEIVER.
NOTES:
1. All black wires must go to a common ground.
2. Polarity is important - red to power / black to ground
Initialization of System
1. Connect the red wire from the light to 12V DC power (+) and the black wire to
ground (-). (Connections-minimum 14 gauge wire). The power must be fused for
10 Amps.
2. Within 5 seconds of applying power to the light you must activate the unit with
your wireless control by pressing the green (power / light) button 2-3 times.
To Next Page
Loading...
Need help?
General