Guest ChargePro 2612A - DC Connection Precautions

4
Model 2612A operations manual
the thermal protection built in. Do not install the charger on carpeted, upholstered, or
 varnishedsurfaces.
2. Locate charger as far away from battery as dc cables permit.
3.Neverplacechargerdirectlyabovebatterybeingcharged;gasesfrombatterywill 
corrode and damage charger.
4.Neverallowbatteryacidtodriponchargerwhenreadingelectrolytespecificgravityor 
filling battery.
5.Donotoperatechargerinaclosed-inareaorrestrictventilationinanyway.
6. Do not set a battery on top of charger.
DC CONNECTION PRECAUTIONS
1.Connectanddisconnectdcoutputsonlyafterremovingaccordfromelectricoutlet. 
 Neverallowthealligatorclipconnectortotoucheachother
2.Checkpolarityofthebatteryposts.ThePOSITIVE(POS.,P,+)batterypostusuallyhas
 alargerdiameterthantheNEGATIVE(NEG.,N,-)post.ConnectRedchargeroutput 
 wiretoPOSITIVEpost,BlackchargerwiretoNEGATIVE.
3. Do not face the battery when making the final connection.