Guide TA Series - Page 12

Bluetooth icon disappears.
Note: Bluetooth remote controllers are optional accessories.
7. Auto stand-by: Time for auto stand-by can be set, during
which if no operation is carried out, it will enter into a stand-by
mode.
8. Auto power-o: Time for auto power-o can be set, during
which any operation will stop it from entering an auto power
o mode.
9. Restoredefault:Toselectwhethertorestorethedefault.
 Select “yes” to restore all the parameters to factory
settings;select“no”tocanceltheoperation.
Note: After the default value is restored, the device will
power o automatically. Manually restart is required to take
eect!
10. Contrast:The grade for image contrastcan be adjusted and
grade 1-10 is adjustable.
11. Brightness: The gradeforimage brightness can be adjusted
and grade 1-10 is adjustable.
Note: The values of contrast and brightness adjustment are
saved under the currently selected scene mode.
12. Position No.:ThreegroupsofOLEDscreenpositiondata can
be saved. Each group of screen positions can be adjusted
independently.
Please select the position number to be adjusted before using