Guide TA Series - Page 11

1. Exit:Toexitthemenubar.
2. Screen brightness: To adjust the gradeofscreenbrightness.
Grade 1-10 is adjustable.
3. Calibration model: To set a/an automatic calibration /scene
calibration / shutter calibration, three types of calibration
model.
4. Video Output: To open/close video output; when the video
output is on, the icon will be displayed in the lower right corner
of screen.
5. Hotpointtrack:Theswitchcanbeset,andwhenhotpointtrack
is on, cursor will track the point with the highest temperature in
the scene.
6. Bluetooth:WhenaBluetoothison,itwillsearchandconnectto
a Bluetooth remote controller, after which is successfully done,
all functions (except power on/o function) of buttons on the
thermal imager can be controlled by this Bluetooth remote
controller.
• Bluetoothon:“Bluetoothissearching…”appearsandthen
quickly disappears, while the Bluetooth icon flickers.
• Successful Bluetooth connection: “Bluetooth connection
success”appearsandthenquicklydisappears,whilethe
Bluetooth icon displays all the time.
• Bluetooth connection failure:“Bluetooth connection
failed” appears and then quickly disappears, and the