Guide TA Series - Battery Indicator

the screen movement function.
13. Screenmovement:Auxiliaryadjustmentofopticalaxis.
The light axis of the equipment has been calibrated before
delivered, screen center coordinates (0, 0).If the optical axis
shift occurs during use, you can use this function to correct the
deviation urgently.
Note:The screen movement is an auxiliary function. Please
use it when necessary.
5. BATTERY INDICATOR
When the thermal imager is powered on, the battery indicator
will display in the upper right corner of the screen as the battery
capacity levels changes. The alight part of the battery indicator
indicates there maining capacity.
High capacity
Medium-high capacity
Medium capacity
Medium-low capacity
Low capacity Scarce capacity
• After power-on and entering a real-time image, the previous
battery capacity levels shall be displayed in the upper right corner
of the screen.
ATTENTION:
· Replace the battery while the power is low!
· In the use of a rechargeable battery, the battery will be full
for a longer time, that is, time for switching from
to
will be longer than that for switching between other battery
capacity levels!