Guide TA Series - Display on; Calibration; Zoom-In; Scene Modes

4.3 Display on
In display o mode, press any key to display on.
4.4 Calibration
Short press the power on/o button when power is on and the
menu is not called out, to complete the corresponding calibration
actions (except the automatic calibration).
4.5 Zoom-In
When power is on and the menu is not called out, short press up
button in turn to trigger normal recycle switching for 2X/4X zoom
in.
4.6 Scene Modes
When power is on and the menu is not called out, short press M
button in turn to switch the scene modes of Enhance / Highlight
/ Nature.
4.7 Pseudo-Color Modes
When power is on and the menu is not called out, short press down
button in turn to switch the pseudo-color modes of white hot, black
hot, red hot, green hot.
• White hot: Objects at relatively high temperature are
displayed to be white or light grey.
• Black hot : Objects at relatively high temperature are
displayed to be black or dark grey.
• Redhot:Objectsatrelativelyhightemperaturearedisplayed
to be red.