To Next PageTo Next Page
Need help?Do you have a question about the Guild BBS08G and is the answer not in the manual?
Explains warning symbols used in the manual for safety.
Provides general safety precautions for power tool operation.
Lists specific safety measures and operating procedures for the band saw.
Lists and illustrates the components included with the band saw.
Lists the accessories provided with the band saw.
Covers critical safety warnings and the tool's intended purpose.
Warns to disconnect power before assembly work.
Instructions for attaching the saw table to the tool.
Guides on how to properly tension the saw blade.
Details how to adjust the blade alignment on the pulleys.
Instructions for adjusting blade guides and support bearings.
How to set the saw table to a 90-degree angle.
Guidance on choosing the appropriate saw blade.
Procedures for replacing the saw blade and pulley tires.
Procedures for replacing table insert and information on controls and dust extraction.
How to set up the tool for making angular cuts.
Pre-operation checks and setup guidelines before using the tool.
Guide for performing longitudinal cuts with the band saw.
Steps for making angular and freehand (curved) cuts.
Instructions on how to safely transport the band saw.
Safety warning about unplugging and cleaning recommendations.
Guidelines for disposing of the tool and its packaging.
Lists technical specifications like voltage, power, and dimensions.
Details sound pressure and sound power levels.
Details the product guarantee terms and conditions.
States compliance with EU directives and standards.
Important information regarding wire colors and plug replacement procedures.
General
