Customer Helpline 0333 3201989
9
Operating Instructions
6. ON/OFF SWITCH (SEE FIG. D)
To start the tool, depress the protective cover over the switch indicated by the mark “I”.
To stop the tool, depress the protective cover indicated by the mark “O”.
7. TAKE THE SPRAY GUN OUT OF THE GUN HOLDER (SEE FIG. E)
This tool is equipped with 1.8m air hose. The spray gun can be taken out of the gun holder to
make work more convenient.
8. TRIGGER (SEE FIG. F1)
Depress the trigger for spraying work.
9. ASSEMBLE THE SHOULDER STRAP.(SEE FIG F2)
There are two holes on the blower,you can use the shoulder strap pothook to install it.
F1 F2
D E
To Next Page
Loading...