15
Maintenance
Technical Data
Remove the plug from the socket before carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the ventilation slots. This is normal
and will not damage your power tool.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
Rated Voltage 230-240V~50Hz
Rated Power 2100W
Rated No-load Speed 8000-23000/min
Collet size Φ6.35mm & 12.7mm
Max plunge depth 60mm
Double insulation
/II
Machine weight 4.42kg
Technical Data Table
A weighted sound pressure L
pA
: 99.4dB(A)
A weighted sound power L
wA
: 110.4dB(A)
K
pA
& K
wA
=3.0dB(A)
Wear ear protection.
Noise Information
To Next Page
Loading...
