A weighted sound pressure L
pA
: 92,8dB(A)
A weighted sound power L
wA
: 103,8dB(A)
K
pA
& K
wA
=3.0dB(A)
Wear ear protection.
Voltage 230-240V~50Hz
Power input 1400W
No load speed 5800/min
Blade size 185mmX24TCT
Blade bore 20mm
Cutting capacity 90° 65mm
45° 45mm
Bevel capacity 0-45°
Protection class
/II
Machine weight 4.26kg
Technical Data Table
Noise Information
Vibration Information
Technical Data
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value Cutting wood a
h,W
= 1,90m/s
2
Uncertainty K =1,5m/s²
The declared vibration total value may be used for comparing one tool with another, and
may also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can
differ from the declared value depending on the ways in which the tool is used
dependant on the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed
WARNING: To be accurate, an estimation of exposure level in the actual conditions
of use should also take account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle but not actually doing the
To Next Page
Loading...
