14
Customer Helpline 0333 3201989
7� POCKET CUTTING (SEE FIG� F1, F2)
Only professionals can do pocket cutting!
Clearly mark the area to be cut.
Note: DO NOT REMOVE the saw and blade from the workpiece while the blade is moving. It
may damage the cut (kerf), cause kickback and loss of control, and result in injury.
8� SAW DUST REMOVAL (SEE FIG� G)
Vacuum adapter (5) attaches the dust extraction outlet (4) to a vacuum cleaner (sold
separately). We recommend you to use the vacuum cleaner for it keeping the work area
clean. It increases cut visibility and reduces airborne dust drastically. It also keeps dust
away from the working environment.
Operating Instructions
F1 F2
G
To Next Page
Loading...
