TM9230A-C1-002 November, 2021
2 November, 2021
Calibration Notes For All Models
Always check availability of equipment and standards prior to starting the calibration If the required
equipment is not available, do not proceed with the calibration.
Ensure all equipment used is within the calibration validity interval.
Before beginning the calibration, inspect the UUT for damage and cleanliness. If the UUT is not in
suitable condition for calibration, please clean or repair before proceeding.
While Table 2 lists recommeded calibration points, actual calibration points should include
consideration for the intended and/or application of the shunt standards.
To Next Page
Loading...