EasyManua.ls Logo

Guldmann DH 1000 - 4.04 Maintenance which should be carried out by the owner?; 5.00 Service and Life Span; 5.01 Life span and servicing; 5.03 Service check

Default Icon
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
4.04 Maintenance which should be carried out by the owner?
Check at regular intervals that the lifting strap has no damages. If the lifting
strap is damaged, DH 1000 should not be used. The lifting strap must only be
exchanged by an authorized installer.
5.00 Service and Life Span
5.01 Life span and servicing
According to the international standard EN/ISO 10535 “Hoist for the transfer
of disabled persons - Requirements and test methods” a safety inspection of
the hoist must be performed at least once a year.
DH 1000 has an expected life span of 15 years. The hoist must then be
assessed by qualified service staff as to its future use.
Spare parts lists and drawings are available from manufacturer or supplier.
5.02 Battery and fuses
Change of batteries and fuses should be carried out by a service engineer or
by the Guldmann Service Team.
5.03 Service check
During the inspection a service report shall be made, describing what has
been checked and exchanged.
Worn or defective parts shall be replaced by new spareparts from
V. Guldmann A/S.
1 Visual check of the product.
Check the product for wear and tear
Check the product for any deformity
Check that the product does not show any other dificiencies.
2 Test of the product, as during normal use.
Check all functions on the product, with and without load,
( eg. Up, down, forward, backward, out and in ).
Check the emergency lowering is operational.
Check the emergency stop is operational.
Check the charging indicator is operational.
3 Dismantle the cover / fence.
4 Check the electrical condition of the products
Check the batteries and measure the:
Input / Voltage
Output / Voltage
Check electrical functions and signals
Check all wirings for errors and defects
Check wire lead-ins
Check all possible conections, plugs etc.
© Guldmann US-890/01/06 # 90067
© Guldmann US-890/01/06 # 90067

Related product manuals