EasyManua.ls Logo

GunVault GV2000C-STD - Locating the Battery Tray Kit; Loading the Battery Tray

GunVault GV2000C-STD
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 6 –
IMPORTANT: We recommend that you use ONLY Duracell AA batteries. Eight
(8) AA batteries are required. NEVER attempt to use a 9v battery or rechargeable
batteries – they will not work!
Locating the Battery Tray Kit
With your palm up, reach inside the
GunVault safe and find the far end of
the ceiling foam.
Pinch the far end, and carefully pull it
part of the way out of the unit (like the
tongue of a shoe). DO NOT TEAR IT
LOOSE!
LOCATE THE BATTERY TRAY, AND THE TRAY MOUNTING SCREWS
ON THE CEILING OF THE SAFE.
Loading the Battery Tray
Make sure that the ends of each battery match the positive (+) and negative (-) marking in
the tray exactly. Make sure that the batteries are not loose.

Related product manuals