Need help?Do you have a question about the Guspro BLADEMASTER SH6000 and is the answer not in the manual?
Includes securing the skate, checking squareness, adjusting tension, and essential safety warnings to prevent damage.
Controls material removal from the lower or upper edge of the skate blade across its entire length.
Adjusts top plate for square blade sharpening by controlling material removal from upper/lower edges.
Calibrating the fixture using a squared blade, Pro-Square, or comparator for precise sharpening.
Ensure fixture calibration, skate clamping, and proper grinding wheel dressing before sharpening.
Verify blade squareness using the Pro-Square tool for accurate edge verification.
Using a marker to darken the blade aids in locating witness marks for precise adjustments.
Gently move blade into the wheel to create witness marks for comparing blade/fixture location.
Adjust detent knobs to center the blade in the grinding wheel based on side or overall height.
Inspect blade squareness using the Blademaster Pro-Square and make minor detent knob adjustments.
Recommends stoning to remove burrs from blade edges for optimal sharpening results.
Wipe fixture with damp cloth or paintbrush; clean grinding residue regularly for longevity and accuracy.
Periodically inspect fasteners, moving components, springs, and felt pads for wear or damage.
General| Brand | Guspro |
|---|---|
| Model | BLADEMASTER SH6000 |
| Category | Power Tool |
| Language | English |
To Next Page