SH6000 SKATE SHARPENING FIXTURE
WARNING: ALWAYS WEAR EYE PROTECTION WHEN OPERATING A SKATE SHARPENER.
Blademaster thanks you for your purchase of the SH6000 Skate Sharpening Fixture. The SH6000 is an accurate
holder that helps to improve the skate sharpening process and differs in comparison to the traditional skate
sharpening fixtures offered by other manufacturers. In providing unprecedented accuracy and adjustability,
Blademaster has taken the operator into consideration in order to create this unique new tool that will improve the
performance of skate sharpening with better quality and efficiency.
Please read this entire instruction guide as well as ensure that you understand and follow safe operating practices of
the skate sharpening machine prior to using this tool.
The SH6000 Skate Sharpening Fixture is a precision calibrated tool produced to work with the operator.
Adjustment of the unique three-point axis allows virtually unlimited flexibility for maintaining ice-skate blade
edges. The adjustable detent knobs are fully calibrated to work with the Pro-Square (BR100) to accurately produce
square blade sharpening. Blade orientation can be quickly and positively adjusted by rotating the incremental
detent knobs. The SH6000 fixture, with proper adjustments, will sharpen skates in the center of the sharpening
wheel on all Blademaster skate sharpening machines.
Revision Date: September 15-2010 I-SH6000
To Next Page
Loading...