5.9.1. Device Name Setting
The device name can be modified. If the SIP account information in the address book is
required, set the device name to the device name corresponding to the account
information in the address book. The device prompts you whether to use the account
information of the address book.
Device Name Setting
5.9.2. Cloud Server Settings
(1) Default server/Custom server
Upload the registered face and access control card data of the local computer to
the server, and synchronize the data from the server.
When switching to no server mode, you can choose whether to retain the server
data or not. If you select Retain, the device will not clear the data sent by the server.
If you select not to retain, the device clears the data.
Without server
That is, in the single-machine mode, the face and access card data registered on
the machine are saved locally.
When switching to the default server or a custom server, you can select whether to
upload local data. If you select Upload, the local data is uploaded to the server and
the server data is synchronized. If you do not select Upload, data on the local
To Next Page
