5.6 Call Setting
call setting
(1) Call Management Center: After this function is enabled, the function is enabled on
the Mainly Interface , and you can tap to call the management center.
(2) Dial call: After this item is enabled, the function is enabled on the main screen, and
the SIP account can be entered to call the corresponding household.
(3) Contact list call: After this is enabled, this function is enabled in the main interface,
click the contact list to call the corresponding household.
(4) SIP Account Settings
User name: Enter the user name to configure the local SIP account for dial-up calls.
Note: It is not allowed to be the same account as another user in the same network.
Local SIP account: Displays the local SIP account generated by the local user
name and IP address for calling accounts on the same network.
SIP Account 1 and 2: Manually configure SIP account information and select
whether to enable it. Need to enter the user name, server password, server address
and server port, select the transmission mode (UDP, TLS); You can also use the
account information of the address book by setting the device name.
Cloud intercom SIP account: Displays the cloud intercom SIP account assigned by
the server to the device when the device is connected to the cloud server.
To Next Page
