GETTING STARTED
15
Selecting a Waveform
Square Wave
Example: Square Wave, 3Vpp, 75%Duty, 1 kHz
Output
Input: N/A
1. Press Waveform> Square (F2).
2. Press Duty(F1)>7>5>%(F5).
3. Press Freq/Rate>1>kHz (F5).
4. Press AMPL>3>VPP (F6).
5. Press Output.
Triangle Wave
Example: Triangle Wave, 5Vpp,10kHz
Output
Input: N/A
1. Press Waveform>Triangle (F3).
2. Press Freq/Rate>1>0>kHz (F5).
3. Press AMPL>5>VPP (F6).
4. Press Output.
Sine Wave
Example: Sine Wave, 10Vpp,100kHz
Output
Input: N/A
1. Press Waveform >Sine (F1).
2. Press Freq/Rate>1> 0>0> kHz (F5).
3. Press AMPL >1> 0>VPP (F6).
4. Press Output.
To Next Page
Loading...
