GDM-8261 Remote Viewer Guide
18
Data field
4. Stop
measurement
Click on the START button again to stop the
measurement. The button color changes from red to
black.
START key
Configuration
1. Click Setting(O) from the drop
down menu.
The Setting dialog panel appears.
Test Speed
2. In the Test Speed drop down selection menu
choose the sample rate in milliseconds, from 25ms
10000ms.
Record Rate
3. Choose the record rate from the Record 1 in
every drop down selection menu. You can choose
to record from 1 in every 1 to 1 in every 600
measurements.
To Next Page
Loading...
