Need help?Do you have a question about the GW Instek GDM-8351 and is the answer not in the manual?
General| Interface | USB, RS-232 |
|---|---|
| Measurement Functions | DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Frequency, Temperature, Capacitance |
| Capacitance Range | 10nF to 100mF |
| Power Supply | AC 100V to 240V |
| Battery Life | Not applicable (AC powered) |
| Basic DC Voltage Accuracy | 0.05% |
| Basic AC Voltage Accuracy | 0.5% |
| DC Voltage Range | 100mV to 1000V |
Lists important safety guidelines for operation and handling.
Instructions on tilting the stand, power-up sequence, and basic instrument usage.
Details setting up AC/DC voltage measurements, range selection, and conversion tables.
Details setting up AC/DC current measurements and range selection.
Explains 2-wire and 4-wire resistance measurement methods and range selection.
Explains procedures, connections, and settings for diode and continuity tests.
Explains the capacitance measurement procedure, connection, and range selection.
Details measuring frequency or period of signals and related settings.
Details measuring temperature, setting units, thermocouple type, and reference junction.
Explains dual measurement modes and introduces advanced measurement types like dBm/dB/W, Max/Min, Relative, Hold, Compare, Math.
Lists commands to retrieve measurement results and configure sensor settings.
To Next Page
