GW Instek GDM-8351 - Continuity Test

GDM-8351 User Manual
48
Continuity Test
The continuity test checks that the resistance in the DUT is low
enough to be considered continuous (of a conductive nature).
Procedure
1. Press the
/
key twice to activate continuity
testing.
Note: pressing the
/
key once will activate
diode testing.
2. The mode will switch to continuity testing
immediately, as shown below.
Display
W
S
Continuity
state
Continuity function
indicator
Connection
Connect the test lead between the VΩ
terminal and COM terminal. The display
updates the reading.
1000V
750V
500Vpk
INPUT
FUSE
1.25A/1000V
V
W
SENSE
W
4W
COM
200Vpk
H I
LO
10A 1A
CAT II 600V