GW Instek GDM-8351 - Digitalio:mode; Digitalio[1|2|3|4]:Setup; Display:text:clear

COMMAND OVERVIEW
133
DISPlay:TEXT:CLEar
Clear message from display.
Parameter:NONE
Example: DISP:TEXT:CLE
DIGitalio:MODE
Sets the mode for Digital I/O.
Parameter: NORM|USER
Example: DIG:MODE NORM
Sets the Digital I/O Mode to normal.
DIGitalio:MODE?
Returns the Digital I/O mode.
Return parameter: NORM|USER
DIGitalio[1|2|3|4]:SETup
Sets the status for Digital I/O(only for user mode).
Parameter: ON|OFF
Example: DIG1:SET ON
DIGitalio[1|2|3|4]:SETup?
Returns the Digital I/O status (only for User mode).
Return parameter: 0|1, 0=OFF, 1=ON