GW Instek GDM-8351 - Frequency;Period Input Jack Settings

GDM-8351 User Manual
80
Frequency/Period Input Jack Settings
The INJACK settings set which input terminal is used for frequency
or period measurements.
Range
Injack
VOLT, 1A, 10A
Default
VOLT
Procedure
1. Press the MENU key.
2. Go to MEAS on level 1.
3. Go to INJACK on level 2.
4. Set the INJACK setting to either VOLT, 1A or
10A.
5. Press the Enter key to confirm.
6. Press the EXIT key to exit from the INJACK
menu.
Display
INJACK setting