GW Instek GDM-8351 - View Serial Number; View Version Number

SYSTEM/DISPLAY CONFIGURATION
77
View Serial Number
Procedure
1. Press the MENU key.
2. Go to SYSTEM on level 1.
3. Go to S/N on level 2.
4. The serial number will be displayed across both
the primary and secondary display.
Display
REARGPIBCVCCSWEEPFILTRCLSTOCOMP2ND
dBmEXTSHIFTERRLIMITAUTOMATH4W2WDCAC
AVmm
HzWkM
WSFC
mdB
%
AVmm
HzWkM
WSFC
RMTMAXMINRELHOLDSMFAUTO4W2WDCAC
nμF
Exit
Press the EXIT key twice to go back to the
measurement screen.
View Version Number
Procedure
1. Press the MENU key.
2. Go to FW on level 1.
3. Go to VER on level 2.
4. The firmware version number will be displayed
in the secondary display.
5. Press Exit to exit from the version menu.
Display
Note
For details about firmware updates, please contact
the GW Instek Service Center or visit the GW
Instek website at www.gwinstek.com.