Need help?Do you have a question about the GW Instek LCR-914 Series and is the answer not in the manual?
General| Type | LCR Meter |
|---|---|
| Basic Accuracy | 0.1% |
| Equivalent Circuit | Series, Parallel |
| Test Frequency | 100Hz, 120Hz, 1kHz, 10kHz, 100kHz |
| Measurement Modes | L, C, R, D, Q, θ, ESR |
| Interface | USB, RS-232 |
| Power Supply | AC 100V ~ 240V ±10%, 50Hz/60Hz |
| Test Signal Level | 0.1V, 0.3V, 1.0V |
| Output Impedance | 100Ω |
| Model | LCR-914, LCR-915, LCR-916 |
Describes WARNING and CAUTION severity levels for potential risks.
Lists critical safety precautions for meter operation and handling.
Illustrates and describes the meter's front panel components and controls.
Lists general operating, environmental, and physical specifications of the meter.
Details the standard and optional accessories provided with the product.
Accuracy and resolution for various test frequencies available.
Specifies AC/DC signal levels and their accuracy for measurements.
Details on test cable lengths, bandwidth, and types used.
To Next Page
